Tribol™ CM ATO 100 (previously named Tribol ATO 100 LS ZF) is oil designed for severe service in pneumatically operated tools producing rotary and/or reciprocating motion.
Unit of Measure
Package Type |
N/A Drum |
Specific Gravity at 60 Degree Fahrenheit (ºF) (15.6 Degree Celsius (ºC)) Temperature |
N/A 0.9053 |
ISO Viscosity Grade |
N/A 22 cSt |
Viscosity at 100 Degree Celsius (ºC) Temperature |
N/A 3.1 cSt |
Flash Point |
N/A 340 ºF171 ºC |
Pour Point |
N/A -40 ºC-40 ºF |
Four Ball Wear Scar Diameter |
N/A 0.35 mm |
Falex Pin and Vee Wear |
N/A 5 |
Conradson Carbon |
N/A 0.03 % |
Rust Prevention - Distilled Water (24 hours) |
N/A Pass |
Rust, Syn Sea Water |
N/A Pass |
Applications |
N/A Typical applications for Tribol CM ATO 100 are nut-runners, torque wrenches, screw drivers, drills, sanders, chippers, hammers, and any other air-operated machine requiring an ISO 22 viscosity lubricant. Tribol CM ATO 100 can be applied by an airline oiler, spray mist, oil cup, splash, or automatic dispensing equipment and via central oiling or circulation systems. |
Features and Benefits |
N/A Tribol CM ATO 100 offers excellent protection with a very thin film because of a proprietary blend of antiwear, extreme pressure (EP), and friction modifying agents which perform synergistically in combination. It is formulated to sustain a lubricant film in the presence of excessive condensed moisture from a humid environment. Special compounding causes the water to be encapsulated and removed in the exhaust air. This allows the lubricating oil to preferentially wet cylinders, vanes, valves, and other contact surfaces for maximum protection. |