Product Catalog
Request Information
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Unit of Measure

Specifications

Package Type

 N/A Drum

Concentrate Appearance

 N/A Colorless to Pale Yellow Liquid

Dilution Appearance

 N/A Colorless

Odor

 N/A Mild, Sweet

pH Concentrated

 N/A 9.0 to 9.3 pH

pH at 20:1 Ratio

 N/A 8.7 to 9.2 pH

Flash Point

 N/A > 226 ºF

Volatile Organic Compounds

 N/A 110 g/L

BRIX Factor

 N/A 3.3

Applications

Applications

 N/A
  • Band sawing
  • Belt grinding
  • Blanchard grinding
  • Cooling
  • Corrosion inhibition
  • Creep-feed grinding
  • Cutting
  • Cylindrical grinding
  • Double disc grinding
  • Drilling
  • Form cylindrical grinding
  • Form grinding
  • Grinding
  • Internal grinding
  • Plain grinding
  • Reaming
  • Surface grinding
  • Surface milling
  • Tapping
  • Turning

Working Material

 N/A Cast Iron Composites Exotic Alloys Nickel Alloy Plastics Stainless Steel Steels Titanium Tool Steels

Industry Focus

 N/A Aerospace Automotive Compressor Energy Machine Tools Medical

Recommended Concentrations

Light Duty

 N/A 4.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 10.0 %

Features and Benefits

Features and Benefits

 N/A
  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts.
  • This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days
  • Free of: animal derived materials, chlorinated EP additives, DCHA, nitrites, NPEs, phosphorous, siloxane, and sulfurized EP additives

Additional Information

Additional Information

 N/A
  • The harder you work this product the better the results will be.
  • C270 is not recommended in machine tools that rely on the splash of the coolant to lubricate the mechanical portions of the machine tool, e.g. older screw machines, etc.
  • C270 is not recommended on materials like magnesium or zirconium without special precautions.
  • This product is a superior cleaning agent so it may "wash out" dirt and residues when a machine is first charged; a thorough cleaning of older machines is required when installing this product the first time.
  • The minimum recommended concentration is 5% on cast iron and 4% on steel.
  • Concentrations above 7.5% provide excellent corrosion inhibition, tool life, and sump life; however, the best concentration for your operation should be determined by on-site experience.