Product Catalog
Request Information
TRIM VHP E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little- to no- foam.
Unit of Measure

Package Type

 N/A Tote

Concentrate Appearance

 N/A Olive Green to Amber Liquid

Dilution Appearance

 N/A Milky White

Odor

 N/A Mild, Oily

Potential of Hydrogen (pH) at 20:1 Ratio

 N/A 8.2 to 8.9 pH

Flash Point

 N/A > 360 ºF

Volatile Organic Compounds

 N/A 112 g/L

BRIX Factor

 N/A 0.9

Applications

 N/A
  • Creep-feed grinding
  • Cutting
  • Drilling
  • Ejector drilling
  • Grinding
  • Gun drilling
  • Gun reaming
  • Heavy-duty machining center work
  • High-pressure
  • Reaming
  • Roll threading
  • Slotting operations
  • Stamping
  • Tapping
  • Thread forming
  • Very high pressure (VHP)

Working Material

 N/A Aluminum Exotic Alloys High-strength steels Steels Super Alloys

Industry Focus

 N/A Aerospace Automotive

Light Duty

 N/A 5.0 to 5.5 %

Moderate Duty

 N/A 5.5 to 7.5 %

Heavy Duty

 N/A 7.5 %

Features and Benefits

 N/A
  • Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
  • Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Superior cleaning and EP lubrication characteristics to assist in fast, deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
  • Very good anti-weld properties without the use of chlorinated EP additives
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques
  • Free of: chlorinated EP additives and NPEs

Additional Information

 N/A
  • Higher concentrations of VHP® E320 (up to 7.5%) increase both boundary and EP lubrication.
  • Not recommended on long runs of most cast irons.
  • Maintenance of sufficient concentration is critical to long sump life and ease in filtration.
  • Not recommended on very reactive metals like magnesium and zirconium.