Product Catalog
Request Information
TRIM VHP E210 is a specialized, heavy-duty chemical-emulsion, soluble-oil, coolant concentrate. This product is a proven performer in heavy-duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.
Unit of Measure

Package Type

 N/A Pail

Concentrate Appearance

 N/A Olive Green to Amber Liquid

Dilution Appearance

 N/A Milky White

Odor

 N/A Mild, Oily

Potential of Hydrogen (pH) at 20:1 Ratio

 N/A 8.2 to 8.9 pH

Flash Point

 N/A > 351 ºF

Volatile Organic Compounds

 N/A 133 g/L

BRIX Factor

 N/A 0.9

Applications

 N/A
  • Creep-feed grinding
  • Ejector drilling
  • Grinding
  • Gun drilling
  • Gun reaming
  • Heavy-duty machining center work
  • Roll threading
  • Stamping
  • Very high pressure (VHP)

Working Material

 N/A Aluminum Alloys Stainless Steel Steels

Industry Focus

 N/A Aerospace Automotive Medical

Light Duty

 N/A 5.0 to 5.5 %

Moderate Duty

 N/A 5.5 to 7.5 %

Heavy Duty

 N/A 7.5 %

Features and Benefits

 N/A
  • Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
  • Low-to-no foam even in very high-pressure operations such as creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Has sufficient boundary lubrication to do roll-form threading in many materials
  • Superior anti-weld properties without chlorinated EP additives
  • Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques
  • Free of: chlorinated EP additives, chlorine, and NPEs

Additional Information

 N/A
  • Higher concentrations of working solutions increase both boundary and EP lubrication.
  • Not recommended on long runs of most cast irons.
  • Maintenance of sufficient concentration is critical to long sump life and ease in filtration.
  • Most filtration problems can be traced to either a low operating pH or tramp oil contamination.
  • Not recommended on very reactive metals such as magnesium and zirconium.
  • Prolonged contact with concentrations in excess of 7.5% may result in skin irritation.