Shell Gadus S2 OG Clear Oil 6800 is a high performance, semi-synthetic non-bitumastic lubricant. It is based on a careful blend of high viscosity mineral oils, synthetic thickeners and selected additives.
Unit of Measure
Package Type |
N/A Drum |
Weight |
N/A 400 lb |
Lubricant Composition |
N/A Mineral Oil Synthetic Thickeners |
Viscosity at 40 Degree Celsius (ºC) |
N/A 6800 cSt |
Viscosity at 100 Degree Celsius (ºC) Temperature |
N/A 240 cSt |
Flash Point |
N/A > 220 ºC |
Pour Point |
N/A -6 ºC |
Four Ball Extreme Pressure (EP) Weld Point Load |
N/A 250 kg |
Copper Corrosion |
N/A 1B |
Timken Extreme Pressure (EP) Load |
N/A 132.28 lb |
FZG-Test Failure Load Stage |
N/A > 12 |
Applications |
N/A For Heavily Loaded Applications such as Open Gears and Journal Bearings - Shell Gadus S2 OG Clear Oil 6800 can be applied in lubrication equipment previously used for bitumastic lubricants (e.g. Farval, Wakefield, Tecalamit, Lincoln, etc.). The viscous oil nature of the lubricant allows it to be gravity fed into sugar mill centralized lubricators if required. The high viscosity of Shell Gadus S2 OG Clear Oil 6800 has been achieved by combining synthetic thickeners and high viscosity mineral oils. The use of synthetic thickeners has also produced a lubricant with high viscosity index, which helps to provide good pumpability at low temperatures while maintaining high viscosity at elevated temperatures. The high viscosity base oils are combined with extreme pressure additives to give a lubricant with very high film strength and load carrying performance needed for the protection of sugar mill brass bearings and rollers. |
Features and Benefits |
N/A
|
Additional Information |
N/A Seal & Paint Compatibility - Compatible with elastomers, gaskets, seals and paints normally used in the sugar mill industry. |