Castrol Molub-AlloyTM 936 SF Heavy A is a uniquely compounded solvent-free open gear lubricant developed specifically for use on heavy-duty equipment in mining and industrial service. It is compounded to give maximum protection to gears and slides on large draglines and shovels while minimizing potential pollutants to the environment. A highly refined, viscous, paraffinic petroleum derivative is the foundation of a blended base fluid with excellent natural chemical and thermal stability.
A proprietary blend of Molub-Alloy lubricating solids is included to promote anti-wear and load carrying properties beyond those of conventional lubricants. The select lubricating solids work synergistically with chemical anti-wear and extreme pressure (EP) additives to reduce contact temperatures while providing excellent anti-weld protection under extreme pressure and shock loading.
A proprietary blend of Molub-Alloy lubricating solids is included to promote anti-wear and load carrying properties beyond those of conventional lubricants. The select lubricating solids work synergistically with chemical anti-wear and extreme pressure (EP) additives to reduce contact temperatures while providing excellent anti-weld protection under extreme pressure and shock loading.
Unit of Measure
Package Type |
N/A Drum |
Weight |
N/A 400 lb |
Appearance |
N/A Black Free of lumps or agglomerates |
Lubricant Composition |
N/A Mineral Oil |
Thickener Type |
N/A Lithium |
Specific Gravity |
N/A 1.014 |
National Lubricating Grease Institute (NLGI) Consistency |
N/A #0.5 |
Viscosity at 40 Degree Celsius (ºC) |
N/A 1890 cSt |
Flash Point |
N/A 381 ºF194 ºC |
Penetration at 10 Millimeter (mm) and 77 Degree Fahrenheit (ºF) (25 Degree Celsius (ºC)) Temperature (Worked 60 Strokes) |
N/A 330 to 360 |
Four Ball Extreme Pressure (EP) Weld Point Load |
N/A 800 kg |
Four Ball Load Wear Index |
N/A 120 kgf |
Four Ball Wear Scar Diameter |
N/A 0.7 mm |
Copper Corrosion |
N/A 1B |
Pumpability by Lincoln Ventmeter at -1 Degree Celsius (ºC) |
N/A 500 psi |
Rust Test |
N/A Pass |
Lubricating Solids Particle Size |
N/A < 15 µm |
DIN Classification |
N/A OGPF 0 G-10 |
ISO Classification |
N/A L-XABEB-0 |
Applications |
N/A
Molub-Alloy 936 SF Heavy A is suitable for use on all types of open gears, rails and rollers, racks and pinions, dipper sticks and other slides on shovels and draglines. It is certified to Bucyrus International SD 4713 specification for open gear lubricants. The structural integrity and strength of the lubricating film is particularly valuable in the critical process of seating new gears because of the natural occurrence of high spots (asperities) in newly machined surfaces. The lubricating film must separate the mating surfaces sufficiently to cushion the effect of the impact of asperities, and minimize initial pitting which could lead to progressive and destructive pitting later. Molub-Alloy 936 SF Heavy A may be applied either manually or by heavy-duty automatic systems. |
Features and Benefits |
N/A
|
Claims (Meets Requirements) |
N/A Bucyrus International SD 4713 |
Additional Information |
N/A In order to minimize potential incompatibilities when converting to a new grease, all previous lubricant should be removed as much as possible prior to operation. During initial operation, relubrication intervals should be monitored closely to ensure all previous lubricant is purged. |