Product Catalog
Request Information

Monroe AW Hydraulic Oil 32 is a premium-quality anti-wear hydraulic oil with excellent stability, designed to meet the most stringent requirements of most all the major manufacturers and users of hydraulic equipment. This oil is characterized by providing rust protection, low deposit formation, rapid release of entrained air, oxidation resistance, low pour points, and good anti-foam properties. It contains an effective anti-wear agent that helps reduce wear in high speed, high-pressure vane and gear pumps.

Unit of Measure

Specifications

Package Type

 N/A Drum

Quantity

 N/A 55 gal

ISO Viscosity Grade

 N/A AW ISO 32

Viscosity at 100ºC

 N/A 5.5 cSt

Viscosity Index

 N/A 103.5

Flash Point

 N/A 204 ºC400 ºF

Pour Point

N/A -41 ºC-42 ºF

Oxidation

 N/A 6000 hours

Demulsibility

 N/A Pass

Copper Corrosion

 N/A 1B

Rust Test

 N/A Pass

Dielectric Strength

 N/A 30 kV

Applications

Applications

 N/A

Recommended for vane, gear, and piston-type pumps where operating pressures may exceed 3000 psi. These anti-wear hydraulic oils are very effective in reducing vane and gear pump wear and greatly extend the life of systems operating at high loads, speeds, and temperatures.  In a clean dry system, typical value** for ASTM D-877, "Dielectric Breakdown Voltage of Insulating Liquids" will exceed 30 Kilovolts. These hydraulic oils meet performance requirements of  DIN 51524 HLP, Denison HF-0, Eaton-Vickers I-286-S, M-2950-S and Cincinnati Lamb Landis P-68, P69, and P-70.    

Features and Benefits

Features and Benefits

 N/A

Monroe AW Hydraulic Oils are formulated with premium base stocks that provide oxidation resistance, active anti-wear agents to protect critical hydraulic system components and special additive chemistry to increase corrosion protection. The formulation also minimizes air entrainment. 


Monroe AW Hydraulic Oils provide greater protection against thermal breakdown for longer oil life, excellent wear protection for increased equipment reliability and increased protection against rust and other chemical attack of metal components.  

Claims

Claims (Suitable for Use)

 N/A AFNOR NF E 48-603 (HM, HV) AIST - 126 (US Steel), 127 (US Steel) ASTM D6158 - HL, HM Bosch Rexroth RDE-90235 Cincinnati Fives - P-68, P-69, & P-70 DIN 51524-2 HLP DIN 51524-3 HLVP Eaton Brochure 694 for 35VQ25A Eaton I-286 & M-2950 GM LS-2 AW Hydraulic Oil ISO 11158 (HM, HV) ISO 6743/3 (HM, HV) Parker Denison HF-0, HF-1, & HF-2

Note

Note

 N/A

ISO Grades 10, 15, 22, 32, 46, & 68 meet dielectric strength test results described in ASTM D-877 @ 30KV+  providing customer storage and containment are free of moisture under all conditions.