Shell Gadus S5 V100 2 is a lithium complex grease based on synthetic base oils, containing antioxidants, EP, anti-wear, and rust preventing additives. The product contains a special friction modifier which is suitable for high speed bearings, taper roller bearings and cylindrical bearings, type NJ, NUP plus applications with an angle ring.
Unit of Measure
Specifications
Package Type |
N/A Pail |
Thickener Type |
N/A Lithium Complex |
National Lubricating Grease Institute (NLGI) Consistency |
N/A #2 |
Base Oil Viscosity at 40ºC |
N/A 100 cSt |
Viscosity at 100ºC |
N/A 14.0 cSt |
Drop Point |
N/A 500 ºF260 ºC |
Worked Penetration at 77ºF |
N/A 265 to 295 |
Mechanical Stability, Shell Roll (50 hours) |
N/A +50 |
Rust Prevention: SKF Emcor Distilled Water |
N/A Pass |
Rust Prevention: SKF Emcor WWO Distilled Water |
N/A Pass |
Lubricating Ability SKF R2F A |
N/A Pass |
Lubricating Ability SKF R2F B |
N/A Pass |
Operating Temperature Range |
N/A -58 to 302 ºF |
Applications
Applications |
N/A Shell Gadus S5 V100 2 is developed for lubrication of roller bearings operating at high speeds as well as bearings submitted to severe cold. The grease has very low starting and running torques at temperatures down to -50 C (-58 F) and therefore suitable for all year lubrication of outdoor fans and electrical motors. The grease has a very good mechanical and thermal stability and can be used in electrical motors, fans and pumps at bearing temperatures up to 150 C (302 F) where there is a demand for long re-lubrication intervals. |