Castrol Optileb™GR 823 greases (previously called Molub-Alloy™ Foodproof 823 FM) were developed for general lubrication of food machinery. They have been approved as "physiologically safe" by the Landesgewerbe-Anstalt LGA Bayern. Optileb GR 823 greases have also been approved by the U.S. Department of Agriculture (NSF) as "H1" lubricants which can be used in the food and beverage industry even if incidental contact with food products is possible.
A select base oil blend plus an FDA approved thickener provide good adhesion, film strength and water-wash resistance even at elevated temperatures. Drip-free characteristics and the off-white color of Optileb GR 823 greases complement house keeping efforts in food and kindred industries.
A high performance combination of food grade additives provides excellent anti-wear protection. The combination of additives and blending techniques maximize rust and oxidation characteristics for effective rust protection and long service life of the grease.
A select base oil blend plus an FDA approved thickener provide good adhesion, film strength and water-wash resistance even at elevated temperatures. Drip-free characteristics and the off-white color of Optileb GR 823 greases complement house keeping efforts in food and kindred industries.
A high performance combination of food grade additives provides excellent anti-wear protection. The combination of additives and blending techniques maximize rust and oxidation characteristics for effective rust protection and long service life of the grease.
Unit of Measure
Specifications
Package Type |
N/A Pail |
Weight |
N/A 40 lb |
Thickener Type |
N/A Aluminum Complex |
National Lubricating Grease Institute (NLGI) Consistency |
N/A #2 |
Base Oil Viscosity at 40ºC |
N/A 192 cSt |
Base Oil Viscosity at 100ºC |
N/A 17.5 cSt |
Drop Point |
N/A 446 ºF230 ºC |
Flash Point |
N/A > 392 ºF> 200 ºC |
Worked Penetration at 77ºF |
N/A 265 to 295 |
Four Ball Wear Scar Diameter |
N/A 0.6 mm |
Water Resistance |
N/A 0 |
Copper Corrosion |
N/A 1 |
FE-9 Bearing Life Test - A/1500/6000-120 |
N/A Pass |
Rust Prevention: SKF Emcor Distilled Water |
N/A 0/0 |
Roll Stability - Shear Stability (5 hours, 70ºC / 158 ºF) |
N/A < 10 % |
Low Temperature Flow Pressure, Maximum |
N/A 550 mbar |
Claims (Meets Requirements) |
N/A Approved by LGA Bayern FDA - 178.3570, 178.3620 Halal Kosher NSF H1 |
Applications
Applications |
N/A Optileb GR 823 greases should not be mixed with greases using a different thickener. Lubrication intervals should be increased gradually to ensure complete removal of previous lubricant. At higher temperatures (above 100°C) relubrication intervals should be established by inspection. |
Operating Temperature Range |
N/A -22 to 248 ºF |
Features and Benefits
Features and Benefits |
N/A
|
Additional Information
Additional Information |
N/A Optileb GR 823 greases should not be mixed with greases using a different thickener. Lubrication intervals should be increased gradually to ensure complete removal of previous lubricant. At higher temperatures (above 100°C) relubrication intervals should be established by inspection. |