Twin Specialties - Bearing and Circulating Oil

Twin Specialties' line of bearing and circulating oils are made with high performance base oils designed to extend service life and protect equipment against corrosion. These products are approvide for use in Morgan and Danieli equipment.

Request Information Search by Specification

Unit of Measure

Items	550026640 5 gal Shell Morlina S3 BA 100 Bearing and Circulating Oil	550026641 55 gal Shell Morlina S3 BA 100 Bearing and Circulating Oil	500005995 Bulk Shell Morlina S3 BA 100 Bearing and Circulating Oil	550026653 5 gal Shell Morlina S3 BA 150 Bearing and Circulating Oil	550026719 55 gal Shell Morlina S3 BA 150 Bearing and Circulating Oil
Quantity	N/A 5 gal	N/A 55 gal	N/A 330 gal	N/A 5 gal	N/A 55 gal
Density at 15ºC	N/A
American Gear Manufacturers Association (AGMA) Grade	N/A 3	N/A 3	N/A 3	N/A 4	N/A 4
ISO Viscosity Grade	N/A ISO 100	N/A ISO 100	N/A ISO 100	N/A ISO 150	N/A ISO 150
Viscosity at 40ºC	N/A
Viscosity at 100ºC	N/A 11.4 cSt	N/A 11.4 cSt	N/A 11.4 cSt	N/A 14.1 cSt	N/A 14.1 cSt
Viscosity Index	N/A 95
Flash Point	N/A 230 ºC	N/A 230 ºC	N/A 230 ºC	N/A 240 ºC	N/A 240 ºC
Pour Point	N/A -12 ºC
Oxidation Stability	N/A
Turbine Oil Oxidation Stability Test (TOST)	N/A 6000+ hours	N/A 6000+ hours	N/A 6000+ hours	N/A 2250+ hours	N/A 2250+ hours
Rotating Pressure Vessel Oxidation Test (RPVOT)	N/A 800 min	N/A 800 min	N/A 800 min	N/A 600 min	N/A 600 min
Acid Number	N/A 0.05 mg KOH/g
Copper Corrosion	N/A 1B
Rust Prevention - Distilled Water (24 hours)	N/A
Rust, Syn Sea Water	N/A Pass
Demulsibility	N/A 10 min36 mL of free water before centrifuging
Foaming Sequence I (Tendency - Stability)	N/A
Foaming Sequence II (Tendency - Stability)	N/A 30/0 mL
FZG Fail Minimum Load Stage	N/A
Vickers Vane Pump Test, Weight Loss (M-2952-S)	N/A
Water Separability at 54ºC	N/A
Water Separability at 82ºC	N/A
Air Release Valve at 50ºC	N/A
Applications	N/A MORGOIL Type Bearing Systems - Approved for use in Morgoil type bearing commonly found in steel mill applications. (MORGOIL is a registered trademark of the Morgan Construction Company) Heavily Contaminated Lubrication Systems - Shell Morlina S3 BA 100 is recommended for circulating oil systems where water separation is a key issue. Plain and Rolling Element Bearings Industrial Gear Boxes - Enclosed spur, helical, bevel and worm gearboxes where the use of a non-EP rust & oxidation inhibited oil is approved by the equipment manufacturer.	N/A MORGOIL Type Bearing Systems - Approved for use in Morgoil type bearing commonly found in steel mill applications. (MORGOIL is a registered trademark of the Morgan Construction Company) Heavily Contaminated Lubrication Systems - Shell Morlina S3 BA 100 is recommended for circulating oil systems where water separation is a key issue. Plain and Rolling Element Bearings Industrial Gear Boxes - Enclosed spur, helical, bevel and worm gearboxes where the use of a non-EP rust & oxidation inhibited oil is approved by the equipment manufacturer.	N/A MORGOIL Type Bearing Systems - Approved for use in Morgoil type bearing commonly found in steel mill applications. (MORGOIL is a registered trademark of the Morgan Construction Company) Heavily Contaminated Lubrication Systems - Shell Morlina S3 BA 100 is recommended for circulating oil systems where water separation is a key issue. Plain and Rolling Element Bearings Industrial Gear Boxes - Enclosed spur, helical, bevel and worm gearboxes where the use of a non-EP rust & oxidation inhibited oil is approved by the equipment manufacturer.	N/A MORGOIL Type Bearing Systems - Approved for use in Morgoil type bearing commonly found in steel mill applications. (MORGOIL is a registered trademark of the Morgan Construction Company) Heavily Contaminated Lubrication Systems - Shell Morlina S3 BA 150 is recommended for circulating oil systems where water separation is a key issue. Plain and Rolling Element Bearings Industrial Gear Boxes - Enclosed spur, helical, bevel and worm gearboxes where the use of a non-EP rust & oxidation inhibited oil is approved by the equipment manufacturer.	N/A MORGOIL Type Bearing Systems - Approved for use in Morgoil type bearing commonly found in steel mill applications. (MORGOIL is a registered trademark of the Morgan Construction Company) Heavily Contaminated Lubrication Systems - Shell Morlina S3 BA 150 is recommended for circulating oil systems where water separation is a key issue. Plain and Rolling Element Bearings Industrial Gear Boxes - Enclosed spur, helical, bevel and worm gearboxes where the use of a non-EP rust & oxidation inhibited oil is approved by the equipment manufacturer.
Features and Benefits	N/A Long Oil Life - Maintenance Saving - Shell Morlina S3 BA 100 is designed to give superior oxidation resistance under high operating temperatures to give extended oil drain capability compared to basic bearing and circulating oils. The excellent thermal and oxidative stability helps reduce the formation of sludge and other harmful oxidation products. The result is extended oil life, less maintenance and less downtime. Excellent Rust & Corrosion Protection - Shell Morlina S3 BA 100 is formulated with an effective additive package to help prolong the life of bearings and circulating systems through: Enhanced water separation characteristics that help ensure that critical oil films are retained between highly loaded parts in heavily contaminated environments. Good air release characteristics to minimize cavitation and associated damage to circulating pumps. Helps protect against corrosion, even in the presence of water. Enhancing System Efficiency - Shell Morlina S3 BA 100 has outstanding demulsibility and allow water to be shed rapidly from the oil. The water then may be removed by drainage or centrifuge from the lubrication system, thus protecting the installation against corrosion, premature wear & failure. The excellent demulsibility also helps minimize the formation of emulsions which reduce filtration effectiveness, restrict circulation & promote bacterial growth. The use of fine filter filtration helps ensure effective containment free lubrication to critical machine parts.	N/A Long Oil Life - Maintenance Saving - Shell Morlina S3 BA 100 is designed to give superior oxidation resistance under high operating temperatures to give extended oil drain capability compared to basic bearing and circulating oils. The excellent thermal and oxidative stability helps reduce the formation of sludge and other harmful oxidation products. The result is extended oil life, less maintenance and less downtime. Excellent Rust & Corrosion Protection - Shell Morlina S3 BA 100 is formulated with an effective additive package to help prolong the life of bearings and circulating systems through: Enhanced water separation characteristics that help ensure that critical oil films are retained between highly loaded parts in heavily contaminated environments. Good air release characteristics to minimize cavitation and associated damage to circulating pumps. Helps protect against corrosion, even in the presence of water. Enhancing System Efficiency - Shell Morlina S3 BA 100 has outstanding demulsibility and allow water to be shed rapidly from the oil. The water then may be removed by drainage or centrifuge from the lubrication system, thus protecting the installation against corrosion, premature wear & failure. The excellent demulsibility also helps minimize the formation of emulsions which reduce filtration effectiveness, restrict circulation & promote bacterial growth. The use of fine filter filtration helps ensure effective containment free lubrication to critical machine parts.	N/A Paint Compatibility - Shell Morlina S3 BA 100 is compatible with seal materials and paints normally specified for use with mineral oils.	N/A Long Oil Life - Maintenance Saving - Shell Morlina S3 BA 150 is designed to give superior oxidation resistance under high operating temperatures to give extended oil drain capability compared to basic bearing and circulating oils. The excellent thermal and oxidative stability helps reduce the formation of sludge and other harmful oxidation products. The result is extended oil life, less maintenance and less downtime. Excellent Rust & Corrosion Protection - Shell Morlina S3 BA 150 is formulated with an effective additive package to help prolong the life of bearings and circulating systems through: Enhanced water separation characteristics that help ensure that critical oil films are retained between highly loaded parts in heavily contaminated environments. Good air release characteristics to minimize cavitation and associated damage to circulating pumps. Helps protect against corrosion, even in the presence of water. Enhancing System Efficiency - Shell Morlina S3 BA 150 has outstanding demulsibility and allow water to be shed rapidly from the oil. The water then may be removed by drainage or centrifuge from the lubrication system, thus protecting the installation against corrosion, premature wear & failure. The excellent demulsibility also helps minimize the formation of emulsions which reduce filtration effectiveness, restrict circulation & promote bacterial growth. The use of fine filter filtration helps ensure effective containment free lubrication to critical machine parts.	N/A Long Oil Life - Maintenance Saving - Shell Morlina S3 BA 150 is designed to give superior oxidation resistance under high operating temperatures to give extended oil drain capability compared to basic bearing and circulating oils. The excellent thermal and oxidative stability helps reduce the formation of sludge and other harmful oxidation products. The result is extended oil life, less maintenance and less downtime. Excellent Rust & Corrosion Protection - Shell Morlina S3 BA 150 is formulated with an effective additive package to help prolong the life of bearings and circulating systems through: Enhanced water separation characteristics that help ensure that critical oil films are retained between highly loaded parts in heavily contaminated environments. Good air release characteristics to minimize cavitation and associated damage to circulating pumps. Helps protect against corrosion, even in the presence of water. Enhancing System Efficiency - Shell Morlina S3 BA 150 has outstanding demulsibility and allow water to be shed rapidly from the oil. The water then may be removed by drainage or centrifuge from the lubrication system, thus protecting the installation against corrosion, premature wear & failure. The excellent demulsibility also helps minimize the formation of emulsions which reduce filtration effectiveness, restrict circulation & promote bacterial growth. The use of fine filter filtration helps ensure effective containment free lubrication to critical machine parts.
Claims (Meets Requirements)	N/A AGMA 9005 for Inhibited (R&O) Oils Danieli Standard Oil 6.124249F Danieli Super Demulsibility Oil 6.124249F DIN 51517-1 Type C DIN 51517-2 - Type CL Morgan MORGOIL Advanced Lubricant New Oil (Rev. 2.4) Morgan MORGOIL Lubricant Specification New Oil (Rev. 1.1)	N/A AGMA 9005 for Inhibited (R&O) Oils Danieli Standard Oil 6.124249F Danieli Super Demulsibility Oil 6.124249F DIN 51517-1 Type C DIN 51517-2 - Type CL Morgan MORGOIL Advanced Lubricant New Oil (Rev. 2.4) Morgan MORGOIL Lubricant Specification New Oil (Rev. 1.1)	N/A AGMA 9005 for Inhibited (R&O) Oils Danieli Standard Oil 6.124249F Danieli Super Demulsibility Oil 6.124249F DIN 51517-1 Type C DIN 51517-2 - Type CL Morgan MORGOIL Advanced Lubricant New Oil (Rev. 2.4) Morgan MORGOIL Lubricant Specification New Oil (Rev. 1.1)	N/A AGMA 9005 for Inhibited (R&O) Oils Danieli Standard Oil 6.124249F Danieli Super Demulsibility Oil 6.124249F DIN 51517-1 Type C DIN 51517-2 - Type CL Morgan MORGOIL Advanced Lubricant New Oil (Rev. 2.5) Morgan MORGOIL Lubricant Specification New Oil (Rev. 1.1)	N/A AGMA 9005 for Inhibited (R&O) Oils Danieli Standard Oil 6.124249F Danieli Super Demulsibility Oil 6.124249F DIN 51517-1 Type C DIN 51517-2 - Type CL Morgan MORGOIL Advanced Lubricant New Oil (Rev. 2.5) Morgan MORGOIL Lubricant Specification New Oil (Rev. 1.1)
Additional Information	N/A Paint Compatibility - Shell Morlina S3 BA 100 is compatible with seal materials and paints normally specified for use with mineral oils.	N/A Paint Compatibility - Shell Morlina S3 BA 100 is compatible with seal materials and paints normally specified for use with mineral oils.	N/A Paint Compatibility - Shell Morlina S3 BA 100 is compatible with seal materials and paints normally specified for use with mineral oils.	N/A Paint Compatibility - Shell Morlina S3 BA 150 is compatible with seal materials and paints normally specified for use with mineral oils.	N/A Paint Compatibility - Shell Morlina S3 BA 150 is compatible with seal materials and paints normally specified for use with mineral oils.