Twin Specialties - Multi-Grade Hydraulic Oil

Twin Specialties has multi-grade hydraulic oils designed for year-round service in mobile equipment operating at very low or widely varying ambient temperatures. Products are recommended for use in mobile hydraulic equipment, including cherry pickers, backhoes, shovels, hydraulic cranes and extension ladders. It can be used in stationary hydraulic equipment operating at abnormally low temperatures. Twin's product line of mutil-grade hydraulic oils provide excellent lubricity and wear protection, oxidation and corrosion protection and detergency for system cleanliness.

Request Information Search by Specification

Unit of Measure

Items	550031912 330 gal Shell Tellus S4 VX 32 High Viscosity Index (HVI) Hydraulic Oil	D3124601 Bulk Drydene Radias MV 46 Multi-Grade Hydraulic Oil	550026751 55 gal Shell Tellus S4 VX 32 High Viscosity Index (HVI) Hydraulic Oil	D3124602 55 gal Drydene Radias MV 46 Multi-Grade Hydraulic Oil	550026756 5 gal Shell Tellus S4 VX 32 High Viscosity Index (HVI) Hydraulic Oil
Product Type	N/A	N/A Multi-Grade Hydraulic Oil	N/A	N/A Multi-Grade Hydraulic Oil	N/A
Quantity	N/A 330 gal	N/A 275 gal	N/A 55 gal	N/A 55 gal	N/A 5 gal
ISO Viscosity Grade	N/A ISO 32	N/A ISO 46	N/A ISO 32	N/A ISO 46	N/A ISO 32
Viscosity at 100ºC	N/A 9.93 cSt	N/A 7.91 cSt	N/A 9.93 cSt	N/A 7.91 cSt	N/A 9.93 cSt
Viscosity Index	N/A 300	N/A 147	N/A 300	N/A 147	N/A 300
Flash Point	N/A
Pour Point	N/A	N/A -42 ºF	N/A	N/A -42 ºF	N/A
Acid Number	N/A
Copper Corrosion	N/A
Foam Test	N/A
Dielectric Strength	N/A
Oxidation	N/A	N/A 5000 hours	N/A	N/A 5000 hours	N/A
Zinc Weight	N/A	N/A 0.042 %	N/A	N/A 0.042 %	N/A
Applications	N/A Low Temperature Exterior Hydraulic Applications - Shell Tellus S4 VX 32 has been designed for use in all types of hydraulic systems where the operating temperature does not continuously exceed 75 C. Shell Tellus S4 VX 32 has been specifically designed for systems that must be started-up at extremely low temperatures, with a subsequent temperature increase during operation. Note: Operators are recommended to check with the equipment manufacturer to determine whether the viscosity characteristics of Shell Tellus S4 VX 32 are suitable for use in their application.	N/A DRYDENE RADIAS MV 46 is recommended for use in piston, vane or gear-type hydraulic pumps in industrial, mobile and other types of heavy-duty equipment. May be used to replace single viscosity hydraulic fluids where improved performance is preferred High viscosity index and low pour point are ideal for both extremely low and high temperature settings Suitable for use as a general-purpose fluid where standard R&O or straight mineral oils are recommended Low pour point exceeds those of most standard, single viscosity hydraulic fluids, making DRYDENE RADIAS® MV 46 an ideal choice for low temperature applications	N/A Low Temperature Exterior Hydraulic Applications - Shell Tellus S4 VX 32 has been designed for use in all types of hydraulic systems where the operating temperature does not continuously exceed 75 C. Shell Tellus S4 VX 32 has been specifically designed for systems that must be started-up at extremely low temperatures, with a subsequent temperature increase during operation. Note: Operators are recommended to check with the equipment manufacturer to determine whether the viscosity characteristics of Shell Tellus S4 VX 32 are suitable for use in their application.	N/A DRYDENE RADIAS MV 46 is recommended for use in piston, vane or gear-type hydraulic pumps in industrial, mobile and other types of heavy-duty equipment. May be used to replace single viscosity hydraulic fluids where improved performance is preferred High viscosity index and low pour point are ideal for both extremely low and high temperature settings Suitable for use as a general-purpose fluid where standard R&O or straight mineral oils are recommended Low pour point exceeds those of most standard, single viscosity hydraulic fluids, making DRYDENE RADIAS® MV 46 an ideal choice for low temperature applications	N/A Low Temperature Exterior Hydraulic Applications - Shell Tellus S4 VX 32 has been designed for use in all types of hydraulic systems where the operating temperature does not continuously exceed 75 C. Shell Tellus S4 VX 32 has been specifically designed for systems that must be started-up at extremely low temperatures, with a subsequent temperature increase during operation. Note: Operators are recommended to check with the equipment manufacturer to determine whether the viscosity characteristics of Shell Tellus S4 VX 32 are suitable for use in their application.
Features and Benefits	N/A Low Temperature System Operation and Efficiency - The very high viscosity index (VI) of Shell Tellus S4 VX 32 ensures that the hydraulic fluid flows at temperatures where conventional hydraulic fluids would become too thick to allow equipment operation. This allows safe equipment start-up at very low temperatures, with no or minimum heating of the system being required. This delivers increased equipment availability and more efficient operation of the hydraulic system, which in turn, helps users obtain higher productivity from their machines. Extremely Wide Operating Temperature Range - The very high viscosity index of the fresh fluid, coupled with mechanical shear stability, allows operation over a very wide temperature range. All-year round operation with Shell Tellus S4 VX 32 is therefore possible (subject to a maximum operating temperature of 75 C). Equipment Protection - Shell Tellus S4 VX 32 contains a carefully designed ashless (zinc-free) anti-wear additives to help protect critical components of the hydraulic system from wear. Shell Tellus S4 VX 32 is manufactued with a quality system assuring the fluid at the Shell plant filling lines meets the requirements of max ISO 4406 21/19/16 class. As recognized by DIN 51524 specification, the oil is exposed to various influences with transport and storage that could affect the cleanliness level.	N/A DRYDENE RADIAS MV 46 delivers extended performance and protection to critical components using modern base oil and additive chemistry to achieve smooth and efficient operation: Multi-viscosity formulation reduces seasonal fluid changes based on temperature conditions High viscosity index helps maintain consistent viscosity over a broad range of operating temperatures Enhanced additive package bolsters oxidation resistance and metal-to-metal wear minimization Foam reducers allow for complete lubrication and smooth performance throughout the operating system High shear stability to protect against viscosity loss and fluid thinning during operation Superb water separation for protecting equipment operating in harsh environments	N/A Low Temperature System Operation and Efficiency - The very high viscosity index (VI) of Shell Tellus S4 VX 32 ensures that the hydraulic fluid flows at temperatures where conventional hydraulic fluids would become too thick to allow equipment operation. This allows safe equipment start-up at very low temperatures, with no or minimum heating of the system being required. This delivers increased equipment availability and more efficient operation of the hydraulic system, which in turn, helps users obtain higher productivity from their machines. Extremely Wide Operating Temperature Range - The very high viscosity index of the fresh fluid, coupled with mechanical shear stability, allows operation over a very wide temperature range. All-year round operation with Shell Tellus S4 VX 32 is therefore possible (subject to a maximum operating temperature of 75 C). Equipment Protection - Shell Tellus S4 VX 32 contains a carefully designed ashless (zinc-free) anti-wear additives to help protect critical components of the hydraulic system from wear. Shell Tellus S4 VX 32 is manufactued with a quality system assuring the fluid at the Shell plant filling lines meets the requirements of max ISO 4406 21/19/16 class. As recognized by DIN 51524 specification, the oil is exposed to various influences with transport and storage that could affect the cleanliness level.	N/A DRYDENE RADIAS MV 46 delivers extended performance and protection to critical components using modern base oil and additive chemistry to achieve smooth and efficient operation: Multi-viscosity formulation reduces seasonal fluid changes based on temperature conditions High viscosity index helps maintain consistent viscosity over a broad range of operating temperatures Enhanced additive package bolsters oxidation resistance and metal-to-metal wear minimization Foam reducers allow for complete lubrication and smooth performance throughout the operating system High shear stability to protect against viscosity loss and fluid thinning during operation Superb water separation for protecting equipment operating in harsh environments	N/A Low Temperature System Operation and Efficiency - The very high viscosity index (VI) of Shell Tellus S4 VX 32 ensures that the hydraulic fluid flows at temperatures where conventional hydraulic fluids would become too thick to allow equipment operation. This allows safe equipment start-up at very low temperatures, with no or minimum heating of the system being required. This delivers increased equipment availability and more efficient operation of the hydraulic system, which in turn, helps users obtain higher productivity from their machines. Extremely Wide Operating Temperature Range - The very high viscosity index of the fresh fluid, coupled with mechanical shear stability, allows operation over a very wide temperature range. All-year round operation with Shell Tellus S4 VX 32 is therefore possible (subject to a maximum operating temperature of 75 C). Equipment Protection - Shell Tellus S4 VX 32 contains a carefully designed ashless (zinc-free) anti-wear additives to help protect critical components of the hydraulic system from wear. Shell Tellus S4 VX 32 is manufactued with a quality system assuring the fluid at the Shell plant filling lines meets the requirements of max ISO 4406 21/19/16 class. As recognized by DIN 51524 specification, the oil is exposed to various influences with transport and storage that could affect the cleanliness level.
Additional Information	N/A Compatibility - Shell Tellus S4 VX 32 is suitable for use with most hydraulic pumps. Fluid Compatibility - Shell Tellus S4 VX 32 is compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire-resistant fluids).	N/A	N/A Compatibility - Shell Tellus S4 VX 32 is suitable for use with most hydraulic pumps. Fluid Compatibility - Shell Tellus S4 VX 32 is compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire-resistant fluids).	N/A	N/A Compatibility - Shell Tellus S4 VX 32 is suitable for use with most hydraulic pumps. Fluid Compatibility - Shell Tellus S4 VX 32 is compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire-resistant fluids).
Claims (Meets Requirements)	N/A Dietz Automation GmbH (servo valve and proportional valve test equipment) Frigoscandia (low temperature hydraulic systems) Komatsu (hydraulic systems operating in cold and arctic conditions, -50 C to 35 C) Komatsu Mining (operation in cold and arctic conditions, -50 C to 35 C)	N/A Bosch Rexroth DIN 51524, Part 1, 2, & 3 General Motors LS-2 JCMAS HK Parker Denison HF-0, HF-1, & HF-2 Sperry Vickers/Eaton I-286-S, M-2950-S US Steel 127, 136	N/A Dietz Automation GmbH (servo valve and proportional valve test equipment) Frigoscandia (low temperature hydraulic systems) Komatsu (hydraulic systems operating in cold and arctic conditions, -50 C to 35 C) Komatsu Mining (operation in cold and arctic conditions, -50 C to 35 C)	N/A Bosch Rexroth DIN 51524, Part 1, 2, & 3 General Motors LS-2 JCMAS HK Parker Denison HF-0, HF-1, & HF-2 Sperry Vickers/Eaton I-286-S, M-2950-S US Steel 127, 136	N/A Dietz Automation GmbH (servo valve and proportional valve test equipment) Frigoscandia (low temperature hydraulic systems) Komatsu (hydraulic systems operating in cold and arctic conditions, -50 C to 35 C) Komatsu Mining (operation in cold and arctic conditions, -50 C to 35 C)