Product Catalog
Request Information
TRIM C320 is a high-lubricity, low-foam, synthetic coolant that approaches the "down-the-hole" machining performance of premium soluble oils. This product is exceptionally good on aluminum. Even with its very high performance, C320 meets or exceeds most stringent environmental standards.
Unit of Measure

Package Type

 N/A Tote

Concentrate Appearance

 N/A Yellow Liquid

Dilution Appearance

 N/A Light Yellow

Odor

 N/A Mild, Sweet

Potential of Hydrogen (pH) Concentrated

 N/A 9.5 to 9.7 pH

Potential of Hydrogen (pH) at 20:1 Ratio

 N/A 8.8 to 9.2 pH

Flash Point

 N/A > 214 ºF

Volatile Organic Compounds

 N/A 121 g/L

BRIX Factor

 N/A 2.2

Applications

 N/A
  • Aluminum wheel machining
  • Down the hole work
  • Drilling
  • Form grinding
  • Reaming
  • Tapping

Working Material

 N/A Aluminum Cast Iron Copper Alloy Ferrous Metals Nonferrous Metals Steel Alloys

Industry Focus

 N/A Automotive Diecast Firearms Job Shop

Light Duty

 N/A 4.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 10.0 %

Features and Benefits

 N/A
  • Excellent extreme pressure (EP) lubricity to do many drilling, tapping, reaming, and form-grinding operations without any chlorine or sulfur-based EP additives
  • A very versatile product which works well in mixed-metal situations
  • Provides good corrosion inhibition on all common ferrous and nonferrous alloys
  • Keeps grinding wheels clean and sharp for higher "G ratios", better surface integrity, and faster stock removal
  • Operators like C320's very low odor, low foam, low mist, and light yellow working solution
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Exceptional sump life, great resistance to fungus and bacteria, and good tramp oil rejection
  • C320 is a super product for aluminum wheel machining

Additional Information

 N/A
  • C320 has increased tendency to foam as the fluid temperature falls below 80°F (27°C).
  • Concentration should be kept at 7.5% or higher for operations at lower SFPM, soft or "gummy" material, or operations where finish is a factor.
  • C320 is not recommended in machine tools that rely on splash lubrication from the coolant; e.g., older screw machines or transfer machines.
  • C320 is not recommended on magnesium or zirconium without special precautions.
  • This product may "wash out" dirt and residues when a machine is first charged. Machines should be thoroughly precleaned with Whamex XT™.
  • Concentrations of 7.5% - 10% usually give the best tool life, finish, and sump life; however, the best concentration for your operation should be determined by on-site testing.