Product Catalog
Request Information
TRIM C115 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.
Unit of Measure

Package Type

 N/A Tote

Concentrate Appearance

 N/A Pale Yellow Liquid

Dilution Appearance

 N/A Colorless

Odor

 N/A Mild, Sweet

Potential of Hydrogen (pH) Concentrated

 N/A 9.6 to 9.8 pH

Potential of Hydrogen (pH) at 20:1 Ratio

 N/A 8.8 to 9.6 pH

Flash Point

 N/A > 219 ºF

Volatile Organic Compounds

 N/A 100 g/L

BRIX Factor

 N/A 3.2

Applications

 N/A
  • Belt grinding
  • Blanchard grinding
  • Cooling
  • Cutting
  • Cylindrical grinding
  • Double disc grinding
  • Drilling
  • Form cylindrical grinding
  • Grinding
  • Internal grinding
  • Plain grinding
  • Reaming
  • Surface grinding
  • Surface milling
  • Tapping
  • Turning

Working Material

 N/A Cast Iron Ceramics Composites Glass Plastics Steels Tool Steels

Industry Focus

 N/A Aerospace Automotive Compressor Job Shop

Light Duty

 N/A 4.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 10.0 %

Features and Benefits

 N/A
  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one-to-two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection
  • Free of: animal derived materials, boron, chlorinated EP additives, DCHA, nitrites, NPEs, phosphourous, siloxane, and sulfurized EP additives

Additional Information

 N/A
  • C115 is not recommended in machine tools that rely on coolant splash to lubricate the mechanical portions of the machine tool; e.g., older screw machines, etc.
  • Foam may increase if the temperature is below 80°F (27°C) at the point of agitation.
  • C115 is not recommended on materials (i.e., magnesium or zirconium) without special precautions.
  • This product is a superior cleaning agent so it may "wash out" dirt and residues when a machine is first charged; a thorough cleaning of older machines is required when installing this product for the first time.
  • The minimum recommended concentration is 5% on cast iron, 4% on steel, and 5% in glass grinding.
  • Concentrations above 7.5% provide the best corrosion inhibition, tool life, and sump life; however, on-site testing is usually the best way to set your concentration.