Product Catalog
Request Information
TRIM SOL nd is a no dye soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.
Unit of Measure

Package Type

 N/A Pail

Concentrate Appearance

 N/A Brown Liquid

Dilution Appearance

 N/A Milky White

Odor

 N/A Mild, Sweet

Potential of Hydrogen (pH) at 20:1 Ratio

 N/A 8.0 to 9.0 pH

Flash Point

 N/A > 208 ºF

Volatile Organic Compounds

 N/A 94 g/L

BRIX Factor

 N/A 1.0

Applications

 N/A
  • Broaching
  • Centerless grinding
  • Gear hobbing
  • Sawing
  • Surface grinding
  • Turning

Working Material

 N/A Ferrous Metals Nonferrous Metals

Industry Focus

 N/A Automotive

Light Duty

 N/A 3.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 20.0 %

Features and Benefits

 N/A
  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Free of: amines, animal derived materials, boron, DCHA, MEA, NPEs, and phosphorous

Additional Information

 N/A
  • Runs effectively for long periods without the need for costly additives.
  • Compatible with all ferrous and nonferrous materials, but not normally intended for use on long runs of gray cast iron or grades 40 or 60 nodular iron.
  • Can run at lower concentrations for higher speed operations where heat removal is the key issue.
  • Higher concentrations are recommended on soft, gummy materials and for lower speed operations where friction reduction and control of the BUE are critical.
  • Concentrations of 7% and higher provide the best sump life with this product.