Product Catalog
Request Information
TRIM SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.
Unit of Measure

Package Type

 N/A Drum

Concentrate Appearance

 N/A Blue Liquid

Dilution Appearance

 N/A Blue

Odor

 N/A Mild, Sweet

Potential of Hydrogen (pH) Concentrated

 N/A 9.0 to 9.3 pH

Potential of Hydrogen (pH) at 20:1 Ratio

 N/A 8.7 to 9.2 pH

Flash Point

 N/A > 226 ºF

Volatile Organic Compounds

 N/A 110 g/L

BRIX Factor

 N/A 3.3

Applications

 N/A
  • Centerless grinding
  • Cooling
  • Corrosion inhibition
  • Down the hole work
  • Drilling
  • Form cylindrical grinding
  • Grinding
  • High-speed turning
  • Reaming
  • Tapping

Working Material

 N/A Cast Iron Composites Copper Alloy Exotic Alloys Plastics Steels Tool Steels

Industry Focus

 N/A Automotive Job Shop Medical

Light Duty

 N/A 4.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 10.0 %

Features and Benefits

 N/A
  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs
  • Free of: animal derived materials, chlorinted EP additives, DCHA, nitrites, NPEs, phosphorous, siloxane, and sulfurized EP additives

Additional Information

 N/A
  • Not recommended in machine tools that rely on the splash of the coolant to lubricate the mechanical portions of the machine tool, e.g. older screw machines, etc.
  • This product is a superior cleaning agent so it may "wash out" dirt and residues when a machine is first charged.
  • The minimum recommended concentration is 5% on cast iron and 4% on steel.
  • Concentrations above 7.5% seem to be better for corrosion inhibition, tool life, and sump life. However, the best concentration for your operation can be determined by on-site testing.