Product Catalog
Request Information
TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.
Unit of Measure

Package Type

 N/A Pail

Concentrate Appearance

 N/A Amber Liquid

Dilution Appearance

 N/A Light Amber

Odor

 N/A Mild

Potential of Hydrogen (pH) Concentrated

 N/A 10.2 to 10.6 pH

Potential of Hydrogen (pH) at 20:1 Ratio

 N/A 9.6 to 10.2 pH

Flash Point

 N/A > 199 ºF

Volatile Organic Compounds

 N/A 183 g/L

BRIX Factor

 N/A 1.7

Applications

 N/A
  • Band sawing
  • Cutting
  • Cylindrical form grinding
  • Drilling
  • Grinding
  • Plain Grinding
  • Reaming
  • Roll threading
  • Surface grinding
  • Surface milling
  • Tapping
  • Thread forming
  • Through-feed centerless grinding
  • Turning

Working Material

 N/A Cast Iron Ferrous Metals Steels Tool Steels

Industry Focus

 N/A Automotive Compressor Diecast Job Shop

Light Duty

 N/A 4.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 10.0 %

Features and Benefits

 N/A
  • The most cost conscience MicroSol offering
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques
  • Free of: chlorinated EP additives, nitrites, phenols, sulfurized EP additives, and trianzine

Additional Information

 N/A
  • MicroSol 485 is designed for moderate to light-duty machining on ferrous metals. Running at or above 6%; offers the best sump life and corrosion inhibition on cast iron chips.
  • Not recommended for use on very reactive metals, such as magnesium.