Product Catalog
Request Information
Shell Gadus S2 U1000 1 is a multipurpose, non-soap grease. They give excellent lubrication for extended time periods, in wet or dry applications, and over a wide range of temperatures. They are also formulated to provide extreme pressure (EP) characteristics. Shell Gadus S2 U1000 1 is based on a non-melting bentonite clay thickener system. Due to the inert nature of the clay, this grease are suitable for applications where the lubricant is exposed to contaminants such as water and chemicals found in many industrial applications including chemical plants and paper mills. This grease is not recommended for use in centralized lubrication systems.
Unit of Measure

Package Type

 N/A Drum

Color

 N/A Brown

Thickener Type

 N/A Bentonite Clay

National Lubricating Grease Institute (NLGI) Consistency

 N/A #1

Base Oil Viscosity at 40 Degree Celsius (ºC) Temperature

 N/A 1000 cSt

Base Oil Viscosity at 100 Degree Celsius (ºC) Temperature

 N/A 90 cSt

Drop Point

 N/A 400 ºF205 ºC

Worked Penetration at 77 Degree Fahrenheit (ºF) Temperature

 N/A 310 to 340

Timken OK Load

 N/A 45 lb

Minimum Four Ball Extreme Pressure (EP) Weld Point

 N/A 250 kg

Four Ball Wear Scar Diameter

 N/A 0.6 mm

Copper Corrosion

 N/A 1B

Rust Prevention - Distilled Water (24 hours)

 N/A Pass

Maximum Oil Separation Loss

 N/A 3 %

Maximum Water Washout Loss

 N/A 5 %

Water Sprayoff Loss

 N/A 10 %

Applications

 N/A
  • Industrial grease lubricated machinery at temperatures up to 250 F (350 F with frequent lubrication).
  • Ball, roller, and sleeve bearings, as well as sliding surfaces and grease lubricated gears.
  • Wet and heavily loaded applications.
  • Chemical plants and paper mills, where grease is exposed to very wet conditions.
  • Mining and process plant, where crushers, screens and kilns are operated at high temperatures.

Features and Benefits

 N/A
  • Non-melting
  • Excellent resistance to water washout
  • Good load carrying capability
  • Good resistance to rust and corrosion