Twin Specialties Corp
Twin Specialties Corp.
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
Print Back
TRIM REGULAR is a chemical surface active or synthetic coolant concentrate designed for general machining and grinding of ferrous materials. It is particularly well suited for machining cast iron, but is an exceptional grinding and high velocity turning and milling fluid. REGULAR contains no sulfur, chlorine, or phosphorus, and meets the requirements of even the most restrictive chemical specifications.
Unit of Measure

Specifications

Package Type

 N/A Tote

Concentrate Appearance

 N/A Straw Color Liquid

Dilution Appearance

 N/A Colorless

Odor

 N/A Mild Pine

pH at 20:1 Ratio

 N/A 8.3 to 8.9 pH

Flash Point

 N/A > 216 ºF

Volatile Organic Compounds

 N/A 62 g/L

BRIX Factor

 N/A 2.3

Applications

Applications

 N/A
  • General purpose
  • Grinding
  • High-speed milling
  • High-speed turning
  • Machining

Working Material

 N/A Cast Iron Ferrous Metals Nonferrous Metals Nonmetallic Materials

Industry Focus

 N/A Aerospace Automotive

Recommended Concentrations

Light Duty

 N/A 4.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 10.0 %

Features and Benefits

Features and Benefits

 N/A
  • Provides rapid and effective cooling
  • Keeps grinding wheels clean and free of loading
  • Has significant levels of specialized wetting agents for boundary lubrications even at very high SFPM
  • Has superior anti-weld action to control built-up edge and chip welding
  • Compatible with ferrous and nonferrous metals as well as most nonmetallic materials
  • Is exceptionally clean and oil free to promote a clean, safe work environment
  • Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools
  • Free of: chlorine, oil, phosphorous, and sulfur

Additional Information

Additional Information

 N/A
  • REGULAR is not recommended for use on reactive metals like magnesium or zirconium.
  • The minimum recommended concentration is 5% on all materials; however, higher concentrations give better sump life, tool life, and corrosion control.
  • REGULAR will foam more at higher concentrations, but care should be used to prevent adding too much antifoam.
  • REGULAR is best when used in high-speed machining situations; however, at higher concentrations (7.5%; plus) it exhibits significant levels of slip lubrication as well.
  • REGULAR works as a light to moderate-duty stamping and drawing fluid at higher concentrations or in its neat form.