Twin Specialties Corp
Twin Specialties Corp.
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
Print Back
TRIM HD is a synthetic (chemical surface active) coolant concentrate used for general machining and grinding of ferrous materials. It utilizes a heavy-duty, chlorinated EP additive package for improved performance on stainless steel, super alloy, and most soft aluminum
Unit of Measure

Specifications

Package Type

 N/A Pail

Concentrate Appearance

 N/A Cream Liquid

Dilution Appearance

 N/A Opaque

Odor

 N/A Mild Pine

pH Concentrated

 N/A 8.4 to 9.0 pH

pH at 20:1 Ratio

 N/A 8.3 to 8.9 pH

Flash Point

 N/A > 208 ºF

Volatile Organic Compounds

 N/A 73 g/L

BRIX Factor

 N/A 2.7

Applications

Applications

 N/A
  • Band sawing
  • Drilling
  • Grinding
  • High-pressure
  • Machining

Working Material

 N/A Aluminum Ferrous Metals Most Nonferrous Metals Nonmetallic Materials Stainless Steel Super Alloys

Industry Focus

 N/A Aerospace Automotive

Recommended Concentrations

Light Duty

 N/A 5.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 10.0 %

Features and Benefits

Features and Benefits

 N/A
  • Provides rapid and effective cooling and reduces machining forces through the use of EP additives and boundary lubricants
  • Has superior anti-weld action to control built-up edge and chip welding
  • Compatible with all ferrous and most nonferrous materials
  • Broad range of applications by using different concentrations for different applications
  • Fully compatible with most nonmetallic materials
  • A superior product for low-speed, high-pressure operations such as production band sawing and drilling
  • Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools

Additional Information

Additional Information

 N/A
  • The minimum recommended concentration is 5% on all materials; however, higher concentrations give better sump life, tool life, and corrosion control.
  • HD at higher concentrations or in the neat form is effective in light to moderate-duty stamping, drawing, and forming.
  • HD works best when used in high-speed machining situations; however, at higher concentrations (7.5% plus), it exhibits significant levels of slip lubrication.
  • HD is not recommended for use on reactive metals (i.e., magnesium or zirconium).