Twin Specialties Corp
Twin Specialties Corp.
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
Print Back
TRIM SOL LC sf is a siloxane-free chemical emulsion or soluble oil coolant concentrate designed for light and moderate machining and grinding. This product is designed for a wide variety of metal removal operations on most ferrous metals and many nonferrous metals, such as brass, copper, and aluminum. This product is particularly effective in situations where reactive alloying agents like lead (Pb) are present.
Unit of Measure

Specifications

Package Type

 N/A Drum

Concentrate Appearance

 N/A Dark Green Liquid

Dilution Appearance

 N/A Blue

Odor

 N/A Mild, Sweet

pH at 20:1 Ratio

 N/A 8.0 to 9.0 pH

Flash Point

 N/A > 212 ºF

Volatile Organic Compounds

 N/A 71 g/L

BRIX Factor

 N/A 1.0

Applications

Applications

 N/A
  • Broaching
  • Gear hobbing
  • Grinding
  • Machining
  • Sawing
  • Turning

Working Material

 N/A Aluminum Brass Copper Ferrous Metals Gray Cast Iron Lead Nonferrous Metals

Industry Focus

 N/A Aerospace Automotive Energy General Industry

Recommended Concentrations

Light Duty

 N/A 3.0 to 6.5 %

Moderate Duty

 N/A 6.5 to 8.5 %

Heavy Duty

 N/A 8.5 to 20.0 %

Features and Benefits

Features and Benefits

 N/A
  • For wide range job applications (from tough assignments such as gear hobbing and broaching to lighter duties like turning) TRIM SOL LC sf has proven equally effective
  • Easily adaptable to nonferrous and ferrous metals
  • Stability - TRIM SOL LC sf forms an extremely tight emulsion of fine particle size and can be run for extended periods without pumpouts
  • Machine stays clean with TRIM SOL LC sf's built-in cleaning action - metal chips and dirt will not build up
  • Fluid residue prohibits sticky ways and slides which is a very important consideration in the operation of automatic and numerically controlled machines
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Free of: chlorinated EP additives, NPEs, and siloxane

Additional Information

Additional Information

 N/A
  • Runs effectively for long periods without the need for costly additives.
  • Compatible with all ferrous and nonferrous materials, but not normally intended for use on long runs of gray cast iron or grades 40 or 60 nodular iron.
  • Can run at lower concentrations for higher speed operations where heat removal is the key issue.
  • Higher concentrations are recommended on soft, gummy materials and for lower speed operations where friction reduction and control of the BUE are critical.
  • Concentrations of 7% and higher provide the best sump life with this product.