Twin Specialties Corp
Twin Specialties Corp.
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
Print Back
TRIM MicroSol 606 bd is a blue dyed, microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.
Unit of Measure

Specifications

Package Type

 N/A Tote

Concentrate Appearance

 N/A Dark Blue Liquid

Dilution Appearance

 N/A Blue

Odor

 N/A Mild

pH at 20:1 Ratio

 N/A 8.8 to 9.2 pH

Flash Point

 N/A > 212 ºF

Volatile Organic Compounds

 N/A 95 g/L

BRIX Factor

 N/A 1.0

Applications

Applications

 N/A
  • Centerless grinding
  • General purpose
  • Horizontal machining
  • Job shop operations
  • Machining
  • Surface grinding
  • Tapping
  • Vertical machining

Working Material

 N/A Aluminum Cast Aluminum Ferrous Metals Nonferrous Metals Steel Alloys Steels

Industry Focus

 N/A Aerospace Job Shop

Recommended Concentrations

Light Duty

 N/A 3.0 to 6.0 %

Moderate Duty

 N/A 6.0 to 8.0 %

Heavy Duty

 N/A 8.0 to 9.0 %

Storage and Handling

Storage and Handling

 N/A
  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives
  • Free of: NPEs and triazine

Additional Information

Additional Information

 N/A
  • Can run at lower concentrations for higher speed operations where heat removal is the key issue, or run at higher concentrations on soft, gummy materials for lower speed operations where friction reduction and control of built-up edge are critical.
  • Keeping MicroSol 606 bd at 7% or higher concentration provides the best sump life.