Twin Specialties Corp
Twin Specialties Corp.
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
Print Back
Castrol Tribol™ SW MWO Range (previously called Tribol™ MWO LS) way oils are used for the lubrication of machine tool slides and ways. Tribol SW MWO 20 and 40 are ISO Viscosity Grades 68 and 220, respectively. These unique way oils are intended for use where solid lubricants cannot be used for cosmetic or other reasons. Tribol SW MWO way oils offer excellent thin-film wear protection due to a proprietary blend of anti-wear, extreme pressure (EP) and friction-modifying agents which perform synergistically in combination. When subjected to the extreme pressure of contacting asperties these additives convert to low-shear compounds on working surfaces, lubricating much like solid-film lubricants. Because the additives in Tribol SW MWO way oils are fully dissolved but act like solid lubricants in service, the products are designated "LS" for "Liquid Solids." The high quality base oils in Tribol SW MWO way oils are selected for their ability to maintain strong film integrity even under great stress. Additional compounding with select polymers adds both adhesive and cohesive characteristics to these products. Tribol SW MWO way oils are not corrosive to ferrous or non-ferrous metals and rust and oxidation inhibiting characteristics are maximized to afford effective rust protection and long life of the oil. Tribol SW MWO way oils are "low phenol" products, typically containing less than 2 ppm of phenolic compounds.
Unit of Measure

Specifications

Package Type

 N/A Tote

Quantity

 N/A 330 gal

ISO Viscosity Grade

 N/A ISO 68

Viscosity at 100ºC

 N/A 8.2 cSt

Viscosity Index

 N/A 82

Flash Point

 N/A 374 ºF190 ºC

Pour Point

N/A -22 ºF-30 ºC

Rust, Syn Sea Water

 N/A Pass

Rust Prevention - Distilled Water (24 hours)

 N/A Pass

Timken OK Load

 N/A 60 lb

Four Ball Load Wear Index

 N/A 55 kgf

Four Ball Weld Point

 N/A 315 kg

Four Ball Wear Scar Diameter

 N/A 0.4 mm

Stick Slip Number

 N/A 0.73

Conradson Carbon

 N/A 0.05 %

Falex Pin and Vee Wear

 N/A 5

Applications

Applications

 N/A Tribol SW MWO way oils are recommended where the use of lubricating solids may be restricted due to manufacturer's requirements, very fine filtration, or concerns about solids contaminating the manufacturing process. They are also suitable for lubricating many components of machine tools, including slides and ways, plain and antifriction bearings, translating screws, headstock gears, and some circulating systems.

Tribol SW MWO way oils are especially useful in applications where non-drip characteristics are desirable to reduce oil loss or control "fly-off" from cams, eccentrics, conveyors, press shaft bearings, and in worn and older machines with expanded clearances. Other important uses for Tribol SW MWO way oils include the lubrication of chains and wire ropes where good adhesion and tackiness are needed, particularly where there is the potential for heavy condensation or waterwash.

Tribol SW MWO way oils are not intended for use in hydraulic systems or some circulating systems that serve both ways and critical hydraulics.

Features and Benefits

Features and Benefits

 N/A
  • Tribol SW MWO way oils special formulation is most effective in the elimination of "stick-slip" and "chatter" on all ways, vertical and horizontal.
  • The clear appearance and non-drip nature can reduce the soilage of production and housekeeping problems as well.