Twin Specialties Corp
Twin Specialties Corp.
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
Print Back
Castrol Tribol™ HM 943 Range (previously called Tribol™ 943 AW) (anti-wear) hydraulic and circulating oils were developed to meet the demands of the most severe hydraulic applications. These high performance, ashless (zinc-free), multi-service oils can extend service life for uninterrupted machine availability and production. The following performance characteristics are emphasised:

Oxidation stability to significantly extend safe oil service life and to protect tight machine clearance from varnish or deposits.

Anti-wear protection to maintain crucial tolerance characteristics of advanced hydraulic systems and to protect gears and bearings in circulating systems.

Corrosion resistance to give protection, exceeding normal industry standards, against damage from condensed atmospheric moisture.
Unit of Measure

Specifications

Package Type

 N/A Drum

Density at 15ºC

 N/A 0.850 g/cm³

ISO Viscosity Grade

 N/A ISO 32

Viscosity at 40ºC

 N/A 32 cSt

Viscosity at 100ºC

 N/A 5.8 cSt

Viscosity Index

 N/A 100

Flash Point

 N/A 428 ºF220 ºC

Pour Point

N/A -36 ºC-33 ºF

Oxidation Stability

 N/A 18000+ hours

Rust Prevention - Distilled Water (24 hours)

 N/A Pass

Rust, Syn Sea Water

 N/A Pass

Foaming Sequence I (Tendency - Stability)

 N/A 10/0 mL

FZG Fail Minimum Load Stage

 N/A 12

Vickers Vane Pump Test, Weight Loss (M-2952-S)

 N/A < 10 mg

Water Separability at 54ºC

 N/A 15 min

Air Release Valve at 50ºC

 N/A 4 min

Applications

Applications

 N/A Hydraulics - designed for the most sophisticated hydraulic operations, robots, and other NC machines, Tribol HM 943 oils may be used in any industrial, marine, or mobile applications.

Circulating systems - outstanding anti-wear properties make Tribol HM 943 oils ideal for multi-component systems including anti-friction and journal bearings and all types of gears except where manufacturers specify AGMA "EP" or “Compounded” gear oils.

Compressors – Tribol HM 943/32 and Tribol HM 943/46 in centrifugal and flooded screw compressors can significantly extend oil service life compared with conventional petroleum compressor oils and ATF fluids. In fact, drain intervals approach the range of some synthetic fluids. Tribol HM 943 oils may also be used in reciprocating compressors if temperatures are not high and units are not prone to valve deposits.

The wide array of Tribol HM 943 applications provides excellent opportunity to consolidate inventory.

The Tribol HM 943 range is fully compatible with the elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Features and Benefits

Features and Benefits

 N/A
  • The base oils in Tribol HM 943 are selected for chemical and thermal stability. They are also selected for the naturally high film strength necessary to prevent rupture at the highest pump pressures and tightest clearances where operating conditions usually lead to mixed or boundary (contact) lubrication. The premium base oils also maintain unsurpassed cleanliness, therefore minimising formation of varnish deposits and wear debris in any system.
  • The anti-wear characteristics of Tribol HM 943 oils are achieved by a unique additive system which does not include zinc. The advanced anti-wear additive systems maintain critical dimensions in robots and other NC machines, therefore extending the service life of valves, pumps, gears, and bearings.
  • The unsurpassed oxidation stability of Tribol HM 943 oils is a result of extensive research to stabilise petroleum oils at high operating temperatures. The balanced, total additive system in Tribol HM 943 oils also inhibits foaming and provides an unusual degree of corrosion protection see Typical Characteristics

Claims

Claims (Meets Requirements)

 N/A BF Goodrich 0152 Bosch Rexroth RE90220 Cincinnati Fives (Cincinnati Machine P-68, P-70, P-69) Denison (Parker Hannafin) HF-0 DIN 51502 - HLP DIN 51524 Part 2 Eaton - 35VQ25, I-286-S, M-2950-S Ford M-6C32 GM LS2 ISO 6743/4 - HM Jeffrey No. 87 Le Norse 100-1 US Steel 126, 127