Twin Specialties Corp
Twin Specialties Corp.
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
Print Back
Shell Gadus S5 V100 2 is a lithium complex grease based on synthetic base oils, containing anti-oxidants, EP, wear, and rust preventing additives. The product contains a special friction modifier which is suitable for high speed bearings, taper roller bearings and cylindrical bearings, type NJ, NUP plus applications with an angle ring.
Unit of Measure

Specifications

Package Type

 N/A Case

Thickener Type

 N/A Lithium Complex

National Lubricating Grease Institute (NLGI) Consistency

 N/A #2

Base Oil Viscosity at 40ºC

 N/A 100 cSt

Base Oil Viscosity at 100ºC

 N/A 14 cSt

Drop Point

 N/A 500 ºF

Worked Penetration at 77ºF

 N/A 265 to 295

Rust Prevention: SKF Emcor Distilled Water

 N/A Pass

Rust Prevention: SKF Emcor WWO Distilled Water

 N/A Pass

Lubricating Ability SKF R2F A

 N/A Pass

Lubricating Ability SKF R2F B

 N/A Pass

Operating Temperature Range

 N/A -58 to 302 ºF

Mechanical Stability, Shell Roll (50 hours)

 N/A 50

Applications

Applications

 N/A Shell Tactic EMV Gadus S5 V100 2 is developed for lubrication of roller bearings operating at moderate speeds as well as bearings submitted to severe cold. The grease has very low starting and running torques at temperatures down to -50 C and there fore suitable for all year lubrication of, for example, outdoor fans and electrical motors. The grease has very good mechanical and thermal stability and can be used in electrical motors, fans and pumps at bearing temperatures up to 150 C where there is a demand for long re-lubrication intervals.