Twin Specialties Corp.
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
1730 Walton Road, Suite 207
Blue Bell, PA 19422
Ph : 610.834.7900
Fax : 610.834.7903
From cost-effective general purpose products to high performance specialty fluids, Twin Specialties' full range of water-extendible coolants can meet all of your machining requirements. Of particular note are the high-pressure biostable fluids designed for use with high-pressure delivery systems, offering excellent foam control, hard water stability and tramp oil rejection. Contact Twin Specialties for information on specific product recommendations and technical support.
| Items |
 0035-1-050 5 gal. Astro-Cut B Semi-Synthetic Coolant |
 0035-1-550 55 gal. Astro-Cut B Semi-Synthetic Coolant |
0037-1-050 5 gal. Astro-Cut BCL Semi-Synthetic Coolant |
0037-1-550 55 gal. Astro-Cut BCL Semi-Synthetic Coolant |
0037-3-050 5 gal. Astro-Cut BCL HW Semi-Synthetic Coolant |
|||||
| Product Type | Semi-Synthetic Coolant | |||||||||
| Quantity | 5 gal | 55 gal | 5 gal | 55 gal | 5 gal | |||||
| Concentrate Appearance | Amber Liquid | |||||||||
| Dilution Appearance | Translucent Amber | |||||||||
| Odor | ||||||||||
| Residual Film | Fluid Soft | |||||||||
| Specific Gravity at 60ºF (15.6ºC) | ||||||||||
| Density | 8.33 lb/gal | 8.33 lb/gal | 8.34 lb/gal | 8.34 lb/gal | 8.34 lb/gal | |||||
| Density Tolerance (±) | 0.1 lb/gal | |||||||||
| Viscosity at 40ºC | ||||||||||
| pH Concentrated | ||||||||||
| pH at 20:1 Ratio | 9.1 pH | |||||||||
| pH at 10:1 Ratio | ||||||||||
| pH Tolerance (±) at 20:1 Ratio | 0.2 pH | |||||||||
| Flash Point | None | |||||||||
| Pour Point | ||||||||||
| Active Sulfur Weight | None | None | ||||||||
| Maximum Active Sulfur Weight | ||||||||||
| Maximum Total Chlorine Weight | ||||||||||
| Total Chlorine Weight | None | None | 1.0 % | 1.0 % | 1.0 % | |||||
| Volatile Organic Compounds | ||||||||||
| BRIX Factor | ||||||||||
| Applications | Astro-Cut B is designed for use in all metalworking applications such as CNC milling, turning, drilling, tapping and grinding. Astro-Cut B is also excellent on cast iron and sawing applications. | Astro-Cut B is designed for use in all metalworking applications such as CNC milling, turning, drilling, tapping and grinding. Astro-Cut B is also excellent on cast iron and sawing applications. | Astro-Cut BCL is designed for use in metal removal operations such as all CNC milling, turning, drilling, tapping, and grinding. Astro-Cut BCL is also excellent on conventional machining processes and sawing applications. | Astro-Cut BCL is designed for use in metal removal operations such as all CNC milling, turning, drilling, tapping, and grinding. Astro-Cut BCL is also excellent on conventional machining processes and sawing applications. | Astro-Cut BCL HW is designed for use in metal removal operations such as all CNC milling, turning, drilling, tapping, and grinding. Astro-Cut BCL HW is also excellent on conventional machining processes and sawing applications. | |||||
| Working Material | ||||||||||
| Industry Focus | ||||||||||
| All Sawing | ||||||||||
| Broaching | ||||||||||
| Centerless Inside Diameter (ID) and Outside Diameter (OD) Surface Grinding | 4 % | |||||||||
| Drilling | ||||||||||
| General Machining | 7 % | 7 % | 5 % | 5 % | ||||||
| Grinding | 4 % | 4 % | 4 % | 4 % | ||||||
| Reaming | ||||||||||
| Tapping | ||||||||||
| Milling, Drilling, and Turning | 5 % | |||||||||
| Tapping, Drilling, and Reaming | ||||||||||
| Tapping, Drilling, and Sawing | ||||||||||
| Tapping, Sawing, and Reaming | 10 % | |||||||||
| Light Duty | ||||||||||
| Moderate Duty | ||||||||||
| Heavy Duty | ||||||||||
| Water Range | ||||||||||
| Features and Benefits | ||||||||||
| Storage and Handling | ||||||||||
| Additional Information | ||||||||||
|
|
||||||||||
